You must follow these steps to pair your Raptor with your Android using Bluetooth. The app's initial setup wizard will guide you through the pairing process. Please allow all permissions for the optimal Raptor experience. Make sure you have your usual bike helmet on hand, as you will need it to ensure the best possible fit.
You can download and install the free app from the Google Play (Android).
1. Your Raptor smartglasses will display an image indicating that you need to open the Everysight app on your phone. Your Raptor's identification number will be shown in the BEAMtm display (Everysight_XXX).
|
2. Open the Everysight app. If this is the first time you have opened the app, you will need to log into your account or create a new one. Then the initial setup wizard will start. If BT is turned off on your Android smartphone, you will be asked to turn Bluetooth on. Click Yes.
|
3. Proceed to Connect My Raptor Smartglasses.
|
4. The App will ask to approve permissions such as location to utilize GPS from your Smartphone
|
5. The app will now begin searching for your Raptor device. Look for a device called Everysight_XXX. In this example we see Everysight_700. 6. If there is more than one Raptor device present, make sure you choose the device with the identification number shown in your Raptor's BEAMtm display. 7. Tap your device to start the pairing process. |
8. When prompted, tap Pair to connect your Raptor device to the app, and complete the Bluetooth pairing step. |
9. The following pages request permissions for the Everysight App to access Media in order to store pictures or videos captured with Raptor.
10. Next, the Everysight app will request permission for phone notifications and location (Raptor can display any notification from your iPhone, like messages, emails, meeting alerts, etc.). Toggle Raptor+ on to receive notifications. |
11. If you do not want this feature to be active immediately, you can click ‘Not Now’ and edit the permissions later in your Settings by selecting Enable/Disable Notifications. |
12. Raptor's innovative BEAMtm technology display needs to be adjusted to your unique eye position. The following two steps will ensure you enjoy a clear, customized display while using your Raptor smartglasses. |
13. Adjusting Raptor's nosepiece. Your helmet might affect Raptor's position on your face and thereby affect the display's location. For this reason, MAKE SURE YOU ARE WEARING YOUR HELMET for the next step, with the straps sitting underneath your Raptor smartglasses. The nosepiece is designed to be adjusted; you can open, close or tilt the nosepiece forward or back for optimal comfort and stability, so that Raptor doesn't move while you're riding. |
13.1 Adjusting the digital display using the app.
|
Use the directional arrows in the app to move Raptor's display up, down, left or right. Position the display so that you can see it comfortably at the center of your field of vision.
If you can't fit the complete display into your field of vision, zoom in or out by using the + or - symbols. The optimal zoom is above 90%. |
Tip: If the display won't move further in a certain direction, try zooming out and then continuing to adjust the placement of the display. |
|
Comments
0 comments
Please sign in to leave a comment.